Section Four: Using The Cooktop; Sealed Burners - Thermador Professional PCG 30 Manuel D'utilisation Et D'entretien

Section 4: USING THE COOKTOP

Sealed Burners

The cooktop features four or six gas surface
burners; each rated at 18,000 BTU/HR (15,000
BTU/ HR using Propane). The burners are
mounted on top of unique-shaped pedestals.
This makes the burner assemblies accessible
for easy cleaning. On all models, the two left
burners have the exclusive ExtraLow feature,
the remaining burners are standard. Each
burner has its own control knob.
Star Brass Burner Base
CONTROL KNOBS
The control knobs for two gas burners, one in
front and one in the rear, are located directly in
front of and below the pair of burners on the
control panel.
The symbol above each control knob identifies
either the burner position on the cooktop or the
griddle control, depending upon your model.
LEFT REAR LEFT FRONT
Burner: Burner:
CENTER REAR CENTER FRONT
Burner: Burner:
Using The Cooktop
RIGHT REAR RIGHT FRONT
Burner: Burner:
GRIDDLE:
Knob
Standard Burner Control Knob
OPERATION OF THE BURNERS
• Press in on the knob and turn it counter-
clockwise to the
• The igniter for the selected burner clicks and
sparks.
• After burner ignition, the igniter stops clicking.
• Rotate the knob to any flame setting between
HI and SIM.
• The blue signal light, between the burner
knobs, will light when adjacent burners are lit.
The light will remain on until the adjacent
burners are turned off.
BTU for Standard Burners
• HI is equivalent to 18,000 BTU/HR
(15,000 BTU / HR using Propane).
• SIM is equivalent to 2,100 BTU / HR.
BTU for ExtraLow® Burners
• HI is equivalent to 18,000 BTU/HR
(15,000 BTU / HR using Propane).
• SIM is equivalent to 3,000 BTU / HR.
• XLO is equivalent to 370 BTU / HR.
7
Setting Indicator
Bezel
setting on the knob.