Operation; Main Power Switch; Setting The Cooktop - Thermador MASTERPIECE Serie Guide D'utilisation Et D'entretien

Operation

Main power switch

Use the main switch to turn on the electronic circuitry for
the control panel. The cooktop is now ready to use.
Turning the cooktop on
Touch the ON/OFF key until the
Turning the cooktop off
Touch the ON/OFF key until the
heat indicators will remain on until the elements have
cooled off sufficiently.
Note: The cooktop switches off automatically when all
the elements have been switched off for more than
20 seconds.
The residual heat indicator remains lit until the elements
have cooled down sufficiently.
the corresponding element symbol.
indicator turns on.
"
turns off. The residual
"
/ is displayed next to
• œ

Setting the cooktop

This section will show you how to set the elements. The
table contains details on the heat settings for a variety of
dishes.
Setting the element
Select the desired heat level using the number keys
1 to 9.
Heat level 1 = minimum power
Heat level 9 = maximum power
Each heat setting has an intermediate level. This level is
indicated by . and is set using
†
Selecting the heat level
The cooktop must be turned on.
Touch the key for the desired element. The
$
1.
‹ indicator will appear in the element display and the
__ indicator will appear underneath the selected
element.
Within the next 10 seconds touch the desired heat
2.
setting (1-9) in the touch control zone.
You can select intermediate settings by touching
3.
or .
A
Note: The selected power level will flash if no pan is
placed on the induction element. After a certain time, the
element turns itself off.
Changing the heat level
Choose the heating element and in the touch control
zone select the desired setting for continuous cooking.
Turning off the element
Select the element and set the heat level to 0. The
element is turned off and the residual heat indicator will
appear after about 10 seconds.
and .
@ A
@
13