Télécharger Imprimer la page

Section 4: Using The Cooktop; Using The Cooktop - Thermador An American Icon Professional PRO-GRAND PRL30 Manuel D'utilisation Et D'entretien

Publicité

Les langues disponibles

Les langues disponibles

SECTION FOUR: USING THE COOKTOP
SEALED BURNERS
®
Sealed Star
Brass Burner Base
The cooktop features four or six
gas surface burners; each rated
at 15,000 BTU/HR (13,000 BTU/
HR using Propane). The burners
are sealed to the stainless steel
top frame to prevent liquid spills
from accumulating below the top
surface, making it easier to clean.
On all models, the two left burners
have the exclusive ExtraLow
feature, the remaining burners are
standard. Each burner has its own
control knob.

Using the Cooktop

CONTROL KNOBS
The control knobs for two sealed
gas burners, one in front and one
in the rear, are located directly in
front of and below the pair of
burners on the control panel.
Setting Indicator
Knob
Standard Burner
Control Knob
The two words above each control
knob identifies the burner position.
For example, LEFT FRONT,
RIGHT FRONT, etc.
OPERATION OF THE
BURNERS
• Press in on the knob and turn it
counter-clockwise to the HI
setting.
• The igniter for the selected
sealed burner clicks and
sparks.
• After flame ignition, the igniter
stops clicking.
• Rotate the knob to any flame
setting between HI and LO.
• The Blue Burner Signal Light,
between the burners, will light
when adjacent burners are lit.
They will remain on until the
burner is turned off.
10
BTU Output for Standard Burners
• HI is equivalent to 15,000 BTU /
HR (13,000 BTU/HR using
Propane).
• LO is equivalent to 2,100 BTU /
HR.
BTU Output for ExtraLow
• HI is equivalent to 15,000 BTU /
HR (13,000 BTU/HR using
Propane).
• LO is equivalent to 3,000 BTU /
HR.
• XLO is equivalent to 370 BTU /
HR.
ExtraLow
The controls for the two left
Bezel
burners, front and rear, have
flame settings even lower than the
standard LO settings.
Setting Indicator
®
ExtraLow
Range
ExtraLow
Control Knob
The drawing shows that the
control knob has an additional
range between the LO and XLO
settings. When the knob is set
within this range, the flame cycles
off and on. By varying the length
of time the flame is off and on, the
heat is reduced even further to
cook delicate foods. For example,
these very low settings are
suitable for simmering and
poaching, melting chocolate and
butter, holding cooked foods at
temperatures without scorching or
burning, etc.
®
Burners
®
Burners
®
Burner

Publicité

Chapitres

loading