General Specification - TensCare Uniglo Mode D'emploi

19. GENERAL SPECIFICATION

Waveform
Amplitude
FACE 1 over 500 Ohm load
FACE 2 over 500 Ohm load
Other programmes over
1 kOhm load
Output plug
Channels
Batteries
Weight
Dimensions
Safety Classification
Software version
Applied Part
Environmental specifications:
Operating:
Storage:
TYPE BF
APPLIED PART
Asymmetrical Bi-Phasic
40 mA zero to peak +ve in 40 steps.
300 µA in phase 1, 250 µA in phase 2 and 80 µA in phase 3.
90 mA zero to peak +ve in 90 steps +/- 10%
Modified constant charge control
Fully shielded: touch proof
Dual channel
Built-in lithium-ion battery
Model: YJ 523450
Manufacturer: YJ Power Group Limited
Ratings: 750mAh, 3.7Wh, 3.7V
100g
120 x 60 x 20 mm
Internal power source.
Designed for continuous use.
No special moisture protection.
R2
Skin surface electrode pads.
Temperature range: 5 to 40⁰C
Humidity: 15 to 90% RH non-condensing
Atmospheric pressure: 700hPa to 1060hPa
Temperature range: -10-+60⁰C (≤ 1 month)
Humidity: 45 to 75% RH non-condensing
Atmospheric pressure: 700hPa to 1060hPa
Equipment providing a degree of protection against
electric shock, with isolated applied part. Indicates that
this device has conductive contact with the end user.
This symbol on the unit means "Refer to Instructions for
use".
This device is not water resistant and should be protected
from liquids.
39
-10-+45⁰C (≤ 3 month)
-10-+28⁰C (≤ 1 year)