Symbols Used - TensCare Uniglo Mode D'emploi

SYMBOLS USED

TYPE BF APPLIED PART: Equipment providing a degree of protection
against electric shock, with isolated applied part. Indicates that this
device has conductive contact with the end user.
This symbol on the unit means "Refer to instructions for use".
Temperature Limitation: indicates the temperature limits to which the
device can be safely exposed.
Lot Number: indicates the manufacturer's batch code so that the batch
or lot can be identified.
Humidity Limitation: indicates the humidity limits to which the device can
be safely exposed.
Serial Number: indicates the manufacturer's serial number so that a
specific device can be identified.
Do not dispose in household waste.
Catalogue Number: indicates the manufacturer's catalogue number so
that the device can be identified.
Atmospheric Pressure: indicates the atmospheric limits to which the
device can be safely exposed.
Manufacturer Symbol
Date of Manufacture: indicates the date which the device was
manufactured. This is included within the serial number found on the
device (usually on the back of the device), as "E/Month/Year/Number"
(MM/YY/123456).
CE Mark
This device is indicated for home use.
This device is not water resistant and should be protected from liquids.
The first number 2: Protected against access to hazardous parts with a
finger, and the jointed test finger of 12 mm ø, 80 mm length, shall have
5