Sony MHC-V800 Mode D'emploi page 20

continued
One Touch Play feature
Press · or ª (or DECK A ª · or
DECK B ª · on the remote) when the
power is off.
You can listen to the tape without pressing
any other buttons when a tape is in the
deck. When a tape is not in the deck, the
system will just turn on.
Automatic Source Selection
If you press · or ª (or DECK A ª ·
or DECK B ª · on the remote) while
you are listening to other sound source, the
tape deck is selected and play starts
automatically.
Recording a CD
You can record from a CD to a tape.
Use TYPE I (normal) or TYPE II (CrO
tapes. Do not use TYPE IV (metal) tapes for
EN
recording.
20 To listen to other sources, you must stop
recording.
Recording a CD
Automatically
By using CD SYNCHRO, you can record
from a CD to a tape quickly.
Use the buttons on the unit to do this
operation.
POWER m ON
DISC
SKIP
DSP
5
3
4
1
Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Chapter 4: the Tape Player
Make sure the tabs on the cassette have
not been removed.
Recording side facing forward
2
Press § OPEN/CLOSE and place a CD.
Then, press § OPEN/CLOSE again to
close the disc tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP repeatedly so
that it lights green.
)
2
3
Select dual or single-sided recording.
To record
One side of the tape
Both sides*
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
CD
1
p
ALL DISC S
4
When you want to reduce the hiss noise
in low-level high-frequency signals,
2
press DOLBY NR so that "DOLBY NR
B" appears in the display.
5
Press CD SYNCHRO.
Deck B stands by for recording.
6
6
Press P PAUSE to release recording
p
pause.
1
Recording starts.
After about 10 seconds, the CD starts
playing.
To stop recording
Press p on deck or the CD player.
To add the surround effect
Press DSP repeatedly until "SUR 1
or "SUR 2
To start recording without a 10
second space
First, playback or record on deck B for a
few seconds, then press CD SYNCHRO.
The CD starts playing immediately after
Label side up
Press DIRECTION
to select
A
ß or RELAY
DIRECTION indication
VOLUME
DOLBY NR OFF
63 125 250 500 1k 2k 4k 8k 16k(Hz)
"
" appears in the display.
recording starts.
This will not work if you press § on deck B
before recording.
Recording a CD Manually
You can record a CD as you like, for
instance, record just the songs you want or
record from the middle of the tape.
POWER m ON
4
5
p
1
Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Press § OPEN/CLOSE and place a CD.
Then, press § OPEN/CLOSE again to
close the disc tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP repeatedly so
that it lights green.
3
Press FUNCTION to select the CD
player.
4
Select dual or single-sided recording.
To record Press DIRECTION to
select
One side of the tape A
Both sides* ß or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
5
When you want to reduce the hiss noise
in low-level high-frequency signals,
press DOLBY NR so that "DOLBY NR
B" appears in the display.
6
Press r REC.
Deck B stands by for recording.
7
Press P PAUSE to release recording
pause.
Recording starts.
8
2
3
6
7
1