Disposal Of Packaging - EMAK OM106J Manuel D'utilisation

After removing the cover, carefully remove the machine from the pallet. This requires preparation of
ramps (2) to avoid damage to parts of the machine. Make sure that there is no shipping damage. Also
unpack all dismantled parts and inspect them.
1. Fabric cover
2. Ramps
3. Grass catcher
4. Documentation
3.1
5. Seat
6. Steering wheel
The basic package includes:
Mower

Steering wheel (6)

Seat (5)

Grass catcher (3) (comes partially disassembled in a cardboard box, with a hanger, connectors and two

triangular yellow stickers) (
Documentation (4) (packing list, user manual for mower, engine manual, battery manual and service

book)

3.2 DISPOSAL OF PACKAGING

After unpacking the accessories, make sure you properly dispose of and recycle
the packaging material.Comply with applicable waste disposal laws in the user's
country.
Disposal can be entrusted to a specialized company.
3.3 ASSEMBLING PACKED UNITS
Because it is technical work, your dealer will prepare the mower for operation (according to
the following instructions).
Before starting installation, remove all protective materials, place the mower on a flat surface,
and align the front wheels in forward position.
3.3.1 STEERING WHEEL, SEAT AND BATTERY
a) Fasten the seat:
Place the seat in its place on the machine and secure it using four bolts, pre-mounted

in the seat. Before tightening the bolts, set the desired position of the seat to match
your body size.
b) Connect the cable to the safety switch:
Connect the electrical cable to the switch connector at the bottom of the seat.

c) Install the steering wheel:
Place the wheel on the column (1) and turn it so that the holes in the steering wheel

and column meet.
Insert the included peg into the hole (2) and pound it with a hammer.

3.3.2) – absent in the case of machine AJ110!
31
3.3.1a
3.3.1b
3.3.1c