Warning Symbols; Installations; Starting; Use Of The Tool - EMAK OS 305 E Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28

3.8 Warning symbols

General warning
Read Operator Instruction Book
Keep safe
distance
4
 INSTALLATION

4.1 Starting

Remove the tool from its box.
Assemble the tool onto the extension pole (11), insert the shaft (22) and tighten the screws (20) of the clamp connection.
Remove the power unit (1) and the cable (13) from their box.
Assemble the power unit onto the extension pole with the chosen harvesting head. Insert the shaft (10) and tighten the screws (2) of
the clamp connection (3).
Join the power supply cable (13) with the connector (4) taking care of the male and female connections. Use the anti-error device for
the proper connectors insertion.
Start the tool by means of the ON/OFF switch (7) and check the led light (9) is on.
Assemble the tool onto the extension pole (11), insert the shaft (25) and tighten the screws (20) of the clamp connection.
WARNING!
When starting the power unit, the harvesting head assembled on the extension pole begins moving immediately. Be very
careful when positioning the tool. It shall be far from people and things. Negletting this warning could mean creating dangers
for the operator.
5
 USE OF THE TOOL

5.1 Starting the tool

Before starting working, wear adequate clothing (see picture F) and check that all the safety devices are well assembled and can operate
properly.
Before starting work, connect the terminals to the battery; the red terminal must be connected to the positive pole, while the black
terminal must be connected to the negative pole.
Hold the tool with one hand on the extension pole, close to the hand grip, and use the other hand to select the ON mode of switch
(7).
The tool is now ready to be used.
WARNING!
Use the tool only for the aims described in chapter "Product description". Any other use may cause injuries.
Start the tool only when it is among the branches. Any improper use damages the tool and causes excessive battery power
consumption.
Beware overhead
power cables
Wear protective headgear
Wear suitable clothing
Wear protective gloves
Use protective footwear
19 - 72

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

So 3005 e

Table des Matières