Masquer les pouces Voir aussi pour OM106J:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 112
(3) ENGINE HOUR GAUGE
The operational hour counter implicitly displays the total number of motor hours. Press the Mode button
to switch between the following service functions:
TMR 1
- individual trip counter. Zeroing is carried out by
OIL CHG
- oil change. The function includes two intervals
AIRFILTER SVC
- cleaning or changing the oil filter, the interval
Two hours before the end of the set interval the display will show a message lasting 10 seconds.
At the end of the interval the display will show a message NOW.
Zeroing of any of the above mentioned alarms is carried out by holding down the Mode button for
6 seconds.
- Manipulation of the counter entails loss of warranty; the hours of movement clock is fitted
with a protective seal.
- If the hours of movement clock is out of action, inform your service agency immediately.

(4) CRUISE CONTROL

The cruise control is used only on long, straight drives. Cruise control must be turned off before any
change in direction.
(5) GRASS CATCHER TILT SWITCH
This switch automatically tilts the grass catcher up or down in the case of the type with electrical
emptying of the basket).
(6) AXLE LOCK PEDAL
This pedal is used only when necessary and only when driving directly forward.
Never use the axle lock when you change driving direction. Otherwise, you may
seriously damage the transmission!
holding down the Mode button for 6 seconds.
for an oil change. The first is after the first
5 hours (oil change after the machine has
been run in) and is displayed only once. The
second is after 25 hours (standard oil change).
is set to 50 hours.
Cruise control is on only when the ignition is on.
The cruise control can be turned off by stepping on the pedal or shutting off
the switch.
To lift or release the catcher, the switch must be held down.
As soon as the grass catcher is at the up or down end position, immediately
release the switch. Doing otherwise can cause electrical failure.
Pressing the pedal downward engages the lock.
Releasing the pedal automatically disengages the lock.
41

Publicité

Table des Matières
loading

Table des Matières