Main Switch; Brake Pedal; Parking Brake Lever - EMAK OM106J Manuel D'utilisation

(5) MAIN SWITCH

Turns the engine on and off. It has the following 4 positions:

(6) BRAKE PEDAL

(7) PARKING BRAKE LEVER

(8) MULCHING LID LEVER
This lever has two functions:
1) Mulching – grass clippings are spread underneath the lawn mower
2) Grass collection – grass clippings are collected in the grass catcher
When shifting the lever from the collection position to the mulching position (downward),
stop the machine and allow the mowing mechanism to run for about 20 seconds to clear
remaining grass from the removal tube. Only then should you shift the lever to mulching
position and drive on. Not following this procedure can cause the lid to operate incorrectly
and can clog the removal tube.
Ignition is off / turn off ignition
Turning the bonnet headlights on and off
Ignition is on, the engine is running.
Engine start-up – start-up position
Stepping on the brake pedal stops the mower.
The pedal is also used when starting the machine, which can be started
only when the brake pedal is pressed.
The parking brake lever has two positions. In position (1), the brake is inactive.
When it is moved to position (2) while pressing the brake pedal, the parking
brake is engaged.
Stepping on the brake pedal disengages the parking brake, automatically
releasing the lever and moving it to position (1).
38