Mounting The Start Luminaire - Waldmann IDOO.line Mode D'emploi

Mounting the modular system
X Calculate the uniform distance a (in
mm) between the suspension points
using the following formula:
Length of modular system − 100
a =
Number of wire ropes − 1
X Mount the other ceiling fixtures to the
ceiling by observing the calculated dis-
tance a to the previously mounted ceil-
ing fixture.
4.4

Mounting the start luminaire

Hanging the wire ropes into the lumi-
naire
Fig. 11: Hanging wire rope into luminaire.
X Insert the ends of the wire rope A into
the guides on the top of the luminaire,
see Fig. 11.
X Insert the other wire ropes.
X Turn the luminaire such that bottom side
points upwards.
Removing the cover
Fig. 12: Removing the cover.
X Remove the cover B on the side on
which the light is directly emitted, see
Fig. 12.
A
Taking out the reflector
Fig. 13: Disengaging the reflector.
X Push one side wall of the luminaire out-
ward by pushing the reflector C in the
opposite direction at the same time,
see Fig. 13.
ENG
B
C
39