Mounting; Mounting Types; Mounting The Luminaire Of Mounting Type "Rope Suspension - Waldmann ACANEO HIAL Mode D'emploi

ENG
3.

Mounting

WARNING
Danger of death caused by a falling
luminaire.
Death or serious injuries.
X Have the luminaire mounted by a
qualified professional only.
X Mount the luminaire on a suitable
wall or ceiling using suitable fas-
tening elements only.
X Mount fastening elements cor-
rectly.
NOTE: Fastening elements are not included
in the scope of delivery. Suitable fastening
elements can be found in the Waldmann
range of accessories.
3.1

Mounting types

The luminaire can be mounted in differ-
ent ways.
The following mounting types are possible:
Mounting type "Rope suspension"
ƒ
Mounting type "Ceiling holder"
ƒ
Mounting type "Wall holder"
ƒ
Mounting type "Adjustable holder"
ƒ
3.2 Mounting the luminaire
of mounting type "Rope
suspension"
Fig. 1: One-point suspension.
X If you want to mount the one-point sus-
pension by Waldmann: Mount the one-
point suspension to the ceiling using
suitable screws.
20
X If you do not want to mount the one-
point suspension by Waldmann: Make
sure that a suitable device is present
from which the luminaire can be sus-
pended later on.
A
Fig. 2: Fastening the wire rope holder to
the wire rope.
X Guide the wire rope A through the first
eyelet of the wire rope holder B, see
Fig. 2.
Fig. 3: Fastening the wire rope to the lu-
minaire.
X Guide the wire rope through the
recess C of the luminaire, see Fig. 3.
X Guide the wire rope through the sec-
ond eyelet of the wire rope holder, see
Fig. 3.
X Adjust the wire rope length using the
springs on the wire rope holder.
X Mount the second wire rope.
X Suspend the luminaire.
Mounting
B
C