Rinnai RUR98i Manuel D'installation Et D'utilisation page 67

How to use the Temperature Controller
Controller Functions
Pressing the "FUNCTION" while the controller is "ON" (with "TIMER" function deactivated ), will allow the user
to set following 4 functions:
1. Power Saving - Allows for conservation of energy by dimming the display. Over time the display will go off
with only the green operation light being on.
2. Beep - Deactivates the Beep sound that would normally occur when a button is pressed.
3. Clock Display - Allows the user to choose if the clock function will be shown while the controller is "On" and/
or "OFF".
4. Temperature Scale - Allows the user to adjust the temperature scale between Fahrenheit and Celsius.
Each time "FUNCTION" is pressed the display will proceed to the next function. While in a function use the "UP"
and/or "DOWN" buttons to select which mode the function is desired to be in.
Function 1. Power Saving
Function 2. Beep ON/OFF
Function 3. Clock Display
Function 4. Temperature Scale
Function Number
Mode
Function Number
Mode
Function Number
Mode
Function Number
Mode
KBP Series Manual
Mode Display
1 Dim
2 Bright
OFF Bright
Mode
ON
OFF
Controller
Mode
ON
1 Clock
2 Clock
OFF No Clock
Mode
1
2
Off Time
After 10 Min
After 20 Min
Remains On
Beep
Beep Active
Silence
Controller
OFF
No Clock
Clock
No Clock
Temperature
°F
°C
67