How To Use The Temperature Controller - Rinnai Rur98I Manuel D'installation Et D'utilisation

How to use the Temperature Controller

The MC-195T controller is the standard temperature controller that is supplied with the water heater. It is
provided in the packaging of both indoor and outdoor models.
DO NOT repeatedly operate the water heater and then use a hot water tap while the controller is turned off.
Operating the water heater in this way to alternately produce hot water may cause water to condense on the
outside of internal parts and accumulate in the water heater cabinet.
PRIORITY Icon
CIRCULATION Icon
TEMPERATURE Icon
COMBUSTION Icon
TIMER SETTING Icon
TIMER 1 & 2 Icon
ON/OFF Icon
Temperatures Available with a Controller
The water heater can deliver water at only one temperature setting at a time. The available temperatures are
provided below. A temperature lower than 98° F (37° C) can be obtained at the tap by mixing with cold water.
Fahrenheit °F
Celsius °C
* Temperature settings from 125-140 °F (52-60 °C) are available by setting SW6 in DIPSW 1 to ON. These
models have a default maximum temperature of 120° F (49° C) and an option (SW6) to increase the
maximum temperature to 140 °F (60 °C).
WARNING
DO NOT adjust the other switches unless specifically instructed to do so.
These temperatures are suggestions only:
TIME Icon
Temperature Settings Available
98 100 102 104
37 38 39 40

Kitchen 120 °F (49° C)

Shower 98 - 110 °F (37 - 43 °C)
KBP Series Manual
LOCK Icon
LOCK Button
106 108 110 115
41 42 43 46
Dedicated Return Mode
Operation Light
ON/OFF Button
FUNCTION Button
WATER TEMPERATURE
Button
PRIORITY Button
TIMER Button
OVERRIDE/SELECT Button
120 125* 130* 135* 140*
49 52 54 57
Cross Over Mode
60
61