Rinnai RUR98i Manuel D'installation Et D'utilisation page 63

How to use the Temperature Controller
Adjusting Timer Settings
1. With the controller "ON", press the "TIMER"
button to display the settings for "TIMER 1".
2. Press the "FUNCTION" button.

The "TIMER 1" icon and grid of the current time
will flash.

When the flashing grid is blank the pump
programming will be inactive at that time frame.
"OFF" will be displayed under the "TIMER 1" icon.

When the flashing grid is illuminated the pump
programming will be active at that time frame.
"ON" will be displayed under the "TIMER 1" icon.
(The following example demonstrates setting "TIMER
1" to activate the pump from 7 AM-9 AM instead of
6 AM-8 AM)
3. Use the "UP" or "DOWN" button to select the time
frame (6:00 AM-7:00AM) to be adjusted.

Press "UP" to move the grid clockwise.

Press "DOWN" to move the grid counter-clockwise.
4. Press the "OVERRIDE/SELECT" button.

"ON" icon will turn to the "OFF" icon.

The grid from 6:00AM-7:00AM will no longer be
lit.
KBP Series Manual 63