Rinnai RUR98i Manuel D'installation Et D'utilisation page 64

5. Press the "UP" or "DOWN" button to move the
grid to 8:00AM-9:00AM.

The grid from 8:00AM-9:00AM will now flash.
6. Press the "OVERRIDE/SELECT" button again.

"OFF" icon will turn to the "ON" icon.

The grid from 8:00AM-9:00AM will now be lit.
64
7. Press the "FUNCTION" button to finish the timer
setting.

The "TIMER 1" will now be solidly lit.

If the "TIMER 1" button is not pressed, the
controller will exit the timer setting
automatically after 30 seconds.
("TIMER 2" setting can be changed in the same way
by simply pressing "TIMER" again in step 1 so that
"TIMER2" has been selected instead.)
KBP Series Manual