Technical Description; Notes On The Electrical Connections - Dometic PERFECTVIEW CAM 50 Instructions De Montage Et De Service

Technical description

6 Technical description
The camera with integrated microphone, which is encased in aluminium housing,
transmits image and sound to a monitor via a cable. The built-in infrared LEDs
improve night vision.
The camera transmits the image as if you are looking in the rear mirror.
The camera consists of the following main elements:
No. in
Description
fig. 9, page 5
1 6-pin connection cable
2 Infrared LEDs
3 Microphone (back side)
7

Notes on the electrical connections

7.1 Laying cables
A
NOTICE! Risk of damage!
• To prevent damage, when drilling ensure that there is sufficient
space on the other side for the drill head to come out.
• Cables and connections which are not properly installed will cause
malfunctions or damage to components. Correct installation of
cables and connections is the basic prerequisite for lasting and
trouble-free operation of the retrofitted components.
• The cables may not be exposed for long periods to solvents such as
benzine, as the solvents can damage the cable.
Please observe the following instructions:
• As far as possible, use original openings or alternative openings for the
connecting cable duct, e.g. the paneling edges, ventilation grilles or blank
panels. If no openings are available, you must drill holes for the cables. Check
beforehand that there is sufficient room for the drill head to come out on the other
side.
14
CAM50
EN