Scope Of Delivery; Intended Use; Technical Description - Dometic PERFECTVIEW VT 100DIG Instructions De Montage Et De Service

Scope of delivery

3 Scope of delivery
No. in
fig. 5, page 4
1
2
–
4

Intended use

The PerfectView VT100DIG radio link (ref. no. 9600000068) is used for the wireless transmission
of signals between the camera and the monitor for the PerfectView reversing video systems from
2011.
5

Technical description

5.1 Function description
The radio link consists of a transmitter module and a receiver module. The two modules can be
mounted inside or outside the vehicle. They transmit pictures and sound wirelesssly from the
camera to the monitor.
The transmitter module is preferably supplied with a voltage via the ignition plus and is also used
to supply the camera with a voltage. When connecting only with the reversing light, the system
pairing cannot be started in reverse gear.
The receiver module is powered by the monitor. The wireless signals are transmitted in the
2.4 GHz range.
Since the system is designed merely as an additional aid for reversing, it does not relieve you of
the duty to take proper care when reversing.
A
NOTICE!
• VT100DIG transmits digital data. The data is displayed on the monitor 0.2 s after it
is recorded by the camera. Therefore, it is essential that you drive slowly.
• If the monitor displays a yellow warning triangle, there is a fault in the picture
transmission. It is possible that the display of the camera image on the monitor is
delayed. Therefore the system may not be used as an aid during reversing in such
circumstances.
10
Quantity Description
1 Transmitter module
1 Receiver module
– Fastening material
VT100DIG
EN