Technical Description - Dometic PERFECTVIEW CAM360 Notice D'utilisation

CAM360

Technical description

4 Technical description
Four 180° wide wangle cameras are located on the front, the rear, and the left and
right sides of the vehicle. A video processor merges the recorded images into a sin-
gle image in real time that shows a birds-eye view of the vehicle and its surroundings
at the front, rear and sides.
The camera system is switched on as soon as the vehicle is started.
The camera system provides a 360° panoramic view and transmits the images in a
birds-eye view of the vehicle's environment to the sides, in front and behind.
Depending on the settings, individual cameras can be activated by input signals,
e.g. by using a turn signal or reverse gear.
The control unit features four camera inputs and connects the cameras to the screens
via a plug connector.
The control unit allows the following options:
• A permanent split screen, or a split screen triggered by a control signal
• Automatic full screen mode for the reversing camera as a rear mirror function
• Permanent full screen mode for the 360° panorama view while the screen is
upright
Videos from the cameras can be saved (SD card or USB stick) and played back
according to the circular buffer principle. A recording sequence lasts 10 minutes,
then the next recording sequence begins automatically. Once the memory is full, the
oldest file is overwritten automatically.
9
EN