Explanation Of Symbols; Safety Instructions - Dometic PERFECTVIEW CAM360 Notice D'utilisation

CAM360
1

Explanation of symbols

!
WARNING!
Safety instruction: Failure to observe this instruction can cause fatal or
serious injury.
A
NOTICE!
Failure to observe this instruction can cause material damage and impair
the function of the product.
I
NOTE
Supplementary information for operating the product.
2

Safety instructions

Please observe the safety instructions and stipulations issued by the
vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical influences and excess voltage
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
The cameras are waterproof. However, the seals on the cameras cannot withstand a
high-pressure cleaner (fig. 1, page 3). Therefore, you should observe the following
instructions when handling the cameras:
A
NOTICE!
• Do not open the cameras, as this impairs the leak tightness and the
function of the cameras (fig. 2, page 3).
• Do not pull at the cables, as this impairs the tightness and the function
of the cameras (fig. 3, page 3).
• The cameras are not suitable for use under water (fig. 4, page 3)!
EN
Explanation of symbols
7