Dometic PERFECTVIEW CAM360 Notice D'utilisation page 14

Video system settings
5.5 Configuring the screen display
Description
"REAR MIRROR"
"REAR MIRROR DURATION" "REAR MIRROR" = "ON"
"START BY CLAMP 15"
(start upon ignition)
"TURN SIGNAL"
"REVERSE GEAR"
14
Description
"ON"
"OFF"
"REAR MIRROR" = "OFF"
"START BY CLAMP 15"
(start upon ignition)
not "ON"
"REAR MIRROR" = "OFF"
"REAR MIRROR" = "ON"
When you shift to reverse gear,
the system switches to the rear
view mirror function (rear cam-
era in full screen mode) with a
time delay.
The split screen function is
permanently active.
"CONST ON": During reversing
the rear view mirror function is
permanently active, even while
the turn signal is active.
"INTERRUPTED": When you
indicate while driving forwards,
the system switches to a split
screen while the turn signal is
active.
Duration of the split screen
while the ignition is on.
"ON": Permanent split screen.
Duration of split screen after
turn signal was activated.
Duration of split screen after
reversing.
Duration of the split screen after
reversing before the system
switches back to the rear view
mirror function.
CAM360
EN