Technical Description - Dometic Waeco PerfectView CAM44 Instructions De Montage Et De Service

PerfectView CAM44
6

Technical description

The colour camera with integrated microphone is encased in an aluminium
housing and transmits image and sound to a monitor via a cable. It has a
close-up lens and a long-range lens. The infrared LEDs improve night vision.
The long-distance lens shows the space behind the vehicle as if you were
looking through a rear window. You can switch it on when you are not
reversing.
The close-up lens (reversing camera) is a wide-angle lens, which shows the
area directly behind the vehicle. It is activated when you engage reverse
gear.
The camera produces three distance marks in reversing mode which are
shown on a connected colour monitor as coloured lines.
The CAM44 camera is equipped with a motorised cover to protect against
dirt.
I
NOTE
The cameras were equipped with a reverse display at the factory.
Any monitor that is connected therefore needs a normal picture
function.
The camera consists of the following elements:
No. in
fig. 9, Description
page 5
1 6-pin connection cable
2 Long-range lens
3 Infrared LEDs
4 Close-up lens (reversing camera)
5 Microphone
EN
Technical description
33