Adjusting The Squelch; Selecting An Operation Band - Kenwood TH-D72A Mode D'emploi

ADJUSTING THE SQUELCH

Squelch is used to mute the speaker when no signals are present. With the
squelch level set correctly, you will hear sound only while actually receiving a
signal. The higher the squelch level selected, the stronger the signals must be in
order to hear them. You can set the squelch level separately for Band A and B.
1 Press [F], [MONI].
• The squelch level appears on the display.
2 Press [ ]/[ ] or rotate the Tuning control of your selected band, when no
signals are present, and select the squelch level at which the background
noise is just eliminated.

SELECTING AN OPERATION BAND

Press [A/B] to select operating band A or B.
15