Basic Operations; Switching Power On/ Off; Adjusting The Volume; Selecting A Zone And Channel - Kenwood NX-3000 Série Guide De L'utilisateur

SWITCHING POWER ON/ OFF

Turn the Power switch/ Volume control clockwise to switch the
transceiver power ON.
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver power OFF.

ADJUSTING THE VOLUME

Rotate the Power switch/ Volume control to adjust the volume.

SELECTING A ZONE AND CHANNEL

1 Select the desired zone using the Selector, 4-way D-pad or
the buttons programmed as [Zone Up]/ [Zone Down]. Each
zone contains a group of channels.
2 Select the desired channel using the Selector, 4-way D-
pad or the buttons programmed as [Channel Up]/ [Channel
Down]. Each channel is programmed with settings for
transmitting and receiving.
The default setting for the Selector is [Channel Select].
●
The transceiver may have names programmed for zones and
●
channels. The zone name and channel name can contain up to 12
and 14 characters respectively. While selecting a zone, the zone
name will appear above the channel name.
If programmed by your dealer, your transceiver will announce the
●
zone and channel numbers as you change them.

BASIC OPERATIONS

25