Basic Operation - Kenwood ProTalk DIGITAL TK-3601D Guide De L'utilisateur

SWITCH THE POWER ON/ OFF
Switch the transceiver power ON by turning the Power
switch/ Volume control clockwise.
• A confi rmation tone sounds, the LCD lights up
momentarily, then the current channel number is
displayed.
To switch the transceiver power OFF, turn the Power
switch/ Volume control fully counterclockwise, until a
click sounds.
ADJUST THE VOLUME
Set your desired volume level by rotating the Power
switch/ Volume control.
• Clockwise increases the volume and
counterclockwise decreases the volume.
Note:
◆ To adjust the volume using background noise as a reference
in analog mode, use the Squelch off Function.
SELECTING A ZONE AND CHANNEL/ ID
1 Select the desired zone using the button programmed
as [Zone]. Each zone contains a group of channels.
2 Select the desired channel/ ID using
.
button
• A confi rmation tone sounds each time you press the
[Zone],
MAKE A CALL
1 To make a call, press and hold the PTT switch,
then speak around the microphone area using
your normal speaking voice.
• Hold the microphone approximately 1.5 inches (3 to
4 cm) from your lips.
2 Release the PTT switch to receive.
14

BASIC OPERATION

, or button.
the or