Fleetsync Operation - Kenwood TK-2160 Mode D'emploi

FleetSync is a protocol owned by KENWOOD Corporation
and is enabled or disabled by your dealer. This function
opens the squelch only when the transceiver receives the
Fleet code and ID code programmed in your transceiver.
Calls that do not contain the correct codes will not be heard.
R
ECEIVING
When you receive a signal containing both your Fleet code
and your ID code, squelch opens and you will hear the call.
• An alert tone will sound.
• The LED indicator flashes orange.
• To mute the speaker after squelch opens, press the key
programmed as Monitor Momentary or Monitor Toggle.
T
RANSMITTING
To transmit a FleetSync signal, simply press the PTT switch
and make the call. If the selected channel has been
programmed with a FleetSync PTT ID, it will be transmitted
when the call is made.

FleetSync OPERATION

21