Advanced Operations; Selecting An Output Power; Monitor / Squelch Off - Kenwood TK-2160 Mode D'emploi

S
ELECTING AN
Each channel is programmed with either high or low output
power by your dealer. You can change the output power of
only channels programmed as high.
When you can reliably communicate with other parties without
using high power, select low power by pressing the key
programmed as RF Power Low. Each time you press RF
Power Low, the output power toggles between high and low.
• Using low power conserves battery power and reduces the risk of
interfering with other communications.
Note:
◆ Pressing RF Power Low while using a channel programmed with
low power causes an error tone to sound.
◆ When changing a channel from high power to low power, all
channels programmed with high power are changed to low.
M / S
ONITOR QUELCH
You can use the Monitor/ Squelch Off key to listen to weak
signals that you cannot hear during normal operation and to
adjust the volume when no signals are present on your
selected channel.
Your dealer can program a key with one of 4 functions:
• Squelch Off Momentary: Press and hold to hear background
noise. Release the key to return to normal operation.
• Squelch Off Toggle: Momentarily press to hear background
noise. Press the key again to return to normal operation.
• Monitor Momentary: Press and hold to deactivate QT, DQT, or
5-Tone Signalling. Release the key to return to normal operation.
• Monitor Toggle: Momentarily press to deactivate QT, DQT, or
5-Tone Signalling. Press the key again to return to normal
operation.

ADVANCED OPERATIONS

O P
UTPUT OWER
O
FF
27