Advanced Operations; Dtmf (Dual Tone Multi Frequency) Calls - Kenwood TK-5220 Mode D'emploi

ADVANCED OPERATIONS

DTMF (DUAL TONE MULTI FREQUENCY) CALLS

■ Making a DTMF Call
Note: DTMF calls can be made only in Conventional FM
operation.
Manual Dialing (Keypad Models Only)
1 Press and hold the PTT switch.
2 Enter the desired digits using the DTMF keypad.
• If you release the PTT switch, transmit mode will end even
if the complete number has not been sent.
• If the Keypad Auto PTT function has been enabled by your
dealer, you do not need to press the PTT swich to transmit;
you can make the call simply pressing the DTMF keys.
Store & Send
1 Enter up to 30 digits using the DTMF keypad.
• Alternatively, you can enter digits by using
{page 14}.
2 Press the PTT switch to make the call.
■ Autodial
Autodial allows you to quickly call DTMF numbers that have
been programmed onto your transceiver.
1 Press the key programmed as Autodial, or access the
Menu {page 12}.
2 Press
the list number directly (01 ~ 32).
• The stored entry appears on the display.
3 Press the PTT switch to make the call.
20
/ to select your desired number, or enter
/