Fleetsync: Alphanumeric 2-Way Paging Function; Selcall (Selective Calling ) - Kenwood TK-2180 Mode D'emploi

FleetSync:
FleetSync is an Alphanumeric 2-way Paging Function, and
is a protocol owned by KENWOOD Corporation. FleetSync
enables a variety of paging functions on your transceiver, some
of which depend on dealer programming.
S (S
ELCALL ELECTIVE
A Selcall is a voice call to a particular station or to a group of
stations.
■
T
RANSMITTING
1 Select your desired zone and group (or zone and
channel).
2 Press the key programmed as Selcall or
Selcall + Status to enter Selcall Mode.
3 Press the <B and C> keys to select the ID of the station
you want to call.
• If Manual Dialing is enabled, you can enter digits by using
the DTMF keypad or by selecting digits with the selector.
When using the selector, rotate it to select a digit, then
press the C> key to accept the digit and shift the cursor to
the right. Repeat this process until the entire ID is entered.
4 Press the PTT switch and begin your conversation.
• Alternatively, you can press the Side 2 key to page the
selected station, rather than making a voice call.
■
R
ECEIVING
An alert tone will sound, the transceiver will automatically
enter Selcall Mode, and the calling station's ID will appear
when a Selcall is received.
To respond to the call, press the PTT switch and speak into
the microphone.
28
ALPHANUMERIC 2-WAY PAGING FUNCTION
C )
ALLING