Redial (Keypad Models Only ); Connect / Disconnect Id S (Keypad Models Only ) - Kenwood TK-2180 Mode D'emploi

■
C S
LEARING
1 Press the key programmed as Autodial Programming.
2 Rotate the selector, press the <B and C> keys, or press
the appropriate DTMF key (01 ~ 32) to select your
desired Autodial list number.
3 Press the A or # key.
• "
entered number.
4 Press the S or
Autodial list.
• The selected memory location is cleared.
R (K
EDIAL EYPAD
You can redial the last number you transmitted.
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Press the
called number.
3 Press the PTT switch to make the call.
Note: Switching OFF the transceiver power clears the redial
memory.
C / D
ONNECT ISCONNECT
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Connect ID: Press the
Disconnect ID: Press the
3 Press the PTT switch to make the call.
DTMF N
TORED
" appears on the display after confirming the
key to delete the entry from the
M O
ODELS
key followed by the 0 key to display the last
ID
S
UMBERS
)
NLY
(K M
EYPAD ODELS
key two times.
key followed by the # key.
O )
NLY
35