2- Tone Signaling - Kenwood TK-2180 Mode D'emploi

2- S
TONE IGNALING
2-tone Signaling is enabled or disabled by your dealer. This
function opens the squelch only when the transceiver receives
the 2 tones programmed in your transceiver. Transceivers that
do not transmit the correct tones will not be heard.
■
R
ECEIVING
When you receive a signal containing the correct tones,
squelch opens and you will hear the call.
• The LED indicator flashes orange.
• To mute the speaker after squelch opens, press the key
programmed as Monitor.
• Your dealer can program the squelch to close again after a
specific time period elapses.
• If Transpond for 2-tone Signaling is programmed, an
acknowledgment signal is returned to the calling station.
• If Call Alert for 2-tone Signaling is programmed, an alert tone
will sound when the correct tones are received.
■
T
RANSMITTING
1 Select your desired zone and channel.
2 Press the key programmed as 2-tone.
3 Press the <B and C> keys to select the 2-tone code of
the station you want to call.
• Alternatively, you can enter the list number by using the
DTMF keypad (keypad models only).
4 Press the PTT switch and begin your conversation.
Note: If Single Tone has been activated, only the first tone of
the 2-tone signal will be transmitted.
22