Kenwood TK-2180 Mode D'emploi page 21

q Antenna connector
Connect an (optional) antenna here {page 8}.
w Selector
Rotate to activate its programmable function {page 15}.
The default setting is Zone Up/Down.
e POWER switch/ VOLUME control
Turn clockwise to switch ON the transceiver. Rotate to
adjust the volume. Turn counterclockwise fully to switch
OFF the transceiver.
r Auxiliary (orange) key
Press to activate its programmable function {page 15}. The
default setting is None (no function).
t Transmit/ Busy/ Call indicator
This LED lights red during transmission, green while
receiving a call (Conventional operating mode only), and
orange when receiving an encoded call (i.e. 2-tone, DTMF
signaling, etc.).
y Side 1 key
Press to activate its programmable function {page 15}. The
default setting is Squelch Off Momentary.
u PTT (Push-To-Talk) switch
Press this switch, then speak into the microphone to call a
station.
i Side 2 key
Press to activate its programmable function {page 15}. The
default setting is Lamp.
o S key
Press to activate its programmable function {page 15}. The
default setting is None (no function).
!0 A key
Press to activate its programmable function {page 15}. The
default setting is None (no function).
11