Placing A Telephone Call; Receiving A Telephone Call - Kenwood TK-2180 Mode D'emploi

P T
LACING A ELEPHONE
1 Select the desired zone and group ID using the selector
and the Zone or CH/GID keys.
• Alternatively, you can press the key programmed as Auto
Telephone to automatically search for a Telephone Repeater.
2 Press and hold the PTT switch for approximately
1 second to ensure a connection.
• Confirm that there is a dial tone after you release the PTT
switch.
3 Place the call, following the instructions for making
a DTMF call, starting on page 32.
4 When the called party responds, press the PTT switch and
speak into the microphone. Release the PTT switch to
receive.
• Only one person can speak at a time.
5 To end the call, press and hold the PTT switch, then
press the # key or the key programmed as Telephone
Disconnect.
R T
ECEIVING A
1 When a telephone call is received, the transceiver will
automatically change to the correct group ID and you will
hear the call.
• A ringer tone will sound when a call is received.
2 Press and hold the PTT switch to speak, and release it to
receive.
• Only one person can speak at a time.
3 To end the call, press and hold the PTT switch, then
press the # key or the key programmed as Telephone
Disconnect.
20
C
ALL
C
ELEPHONE ALL