Store And Send; Autodial - Kenwood TK-2180 Mode D'emploi

S S
TORE AND
Store and send allows you to make DTMF calls without the
need for a DTMF keypad.
1 Press the key programmed as Autodial.
• " " appears on the display.
2 Rotate the selector to select a digit.
• Alternatively, you can enter the digits by using the DTMF
keypad (keypad models only).
3 Press the C> key to accept the entered digit and move to
the next digit.
• Press the A or # key to delete an incorrect character. Press
and hold the A or # key to delete all entered characters.
• You can enter up to 30 digits.
4 Press the PTT switch to make the call after the entire
number is entered.
A
UTODIAL
Autodial allows you to store 32 names (up to 12 characters per
name) and DTMF numbers (up to 16 digits per number).
■
S DTMF N
TORING
1 Press the key programmed as Autodial Programming.
• The first entry in the Autodial list appears on the display.
2 Rotate the selector, press the <B and C> keys, or press
the appropriate DTMF key (01 ~ 32) to select your
desired Autodial list number.
3 Enter the desired name using the selector or keypad.
Rotate the selector or press the keypad to select
a character, then press the C> key to confirm the
character and move the cursor to the right. Repeat this
operation until the complete name is entered, then press
the S key to confirm the entry.
• Press the A or # key to delete an incorrect character.
END
UMBERS
33