5-Tone Signaling - Kenwood NEXEDGE NX-230EX Mode D'emploi

5-tone Signaling is enabled or disabled by your dealer. This
function opens the squelch only when the transceiver receives
the 5 tones programmed in your transceiver. Transceivers that
do not transmit the correct tones will not be heard.
SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a station or group of stations.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as [Selcall], [Selcall +
Status] or [Selcall + SDM] to enter Selcall mode.
3 Press
• You can directly enter the station ID.
4 Press the key programmed as [Call 1] to [Call 6] and
begin your conversation.
Note: Additionally, you can also use the keys programmed as [Digit
1x Down], [Digit 1x Up], [Digit 10x Down], and [Digit 10x Up]
keys to adjust the Selcall number. [Digit 1x Up/Down] increases/
decreases the Selcall number by 1 each time the key is pressed.
[Digit 10x Up/Down] increases/decreases the Selcall number by 10
each time the key is pressed.
■ Receiving
When you receive a call containing the correct tones, the
transceiver will enter Selcall mode. An alert tone will sound
and the calling station's ID appear on the display. Press any
key to return to normal operation.
STATUS MESSAGE
You can send and receive Status messages which may be
decided in your talk group. Messages can contain up to 16
alphanumeric characters.
20

5-TONE SIGNALING

/ to select the station you want to call.