Menu Mode; Menu Access; Menu Configuration - Kenwood NEXEDGE NX-230EX Mode D'emploi

Many functions on this transceiver are selected or confi gured through
the Menu instead of physical controls. Once you become familiar with
the Menu system, you will appreciate the versatility it off ers.

MENU ACCESS

1 Press the key programmed as [Menu].
• The category list is shown.
• When there is only 1 category, the function list is
shown (proceed to step 4).
2 Press
• You can enter a category number directly.
3 Press
4 Press
• You can enter a function number directly.
5 Press
• Press
6 Press
• For settings with more than 1 level, repeat steps 5 and 6.
7 Press
mode.
• Press
• Press

MENU CONFIGURATION

Some transceiver keys may already be programmed with
functions listed in the Menu. Those functions can be accessed
directly by pressing the key. All other functions can still be
accessed using the transceiver Menu. The following table lists
the available Menu items.
Display
ACTIVITY DET
AUTO DIAL
AUTO DIAL PROG
BROADCAST
12

MENU MODE

/ to select a category item.
or to view the function list.
/ to select a function item.
to set up the selected function item.
or
or to return to the category list.
/ to select your desired setting.
to set the selected setting and exit Menu
or
or at any time to return to the previous display.
at any time to exit Menu mode.
Activity Detection ON/OFF
Autodial Mode
Autodial Programming mode
Broadcast ON/OFF
Description