Control Channel Hunt; Voice Announcement - Kenwood NEXEDGE NX-230EX Mode D'emploi

CONTROL CHANNEL HUNT

On NXDN Trunking channels, the transceiver automatically
searches for a control channel.
• While searching for a control channel, the antenna icon will fl ash
and no signals can be received.
PTT ID
PTT ID is the transceiver unique ID code which is sent each
time the PTT switch is pressed and/or released.
Note: PTT ID can be made only in analog operation.

VOICE ANNOUNCEMENT

When changing the zone, channel, and/or group, an audio voice
will announce the new zone, channel and group number.
28