Orientation; Operation Panel (Attached Panel Or Kch-19) - Kenwood NX-5000 Série Guide De L'utilisateur

OPERATION PANEL (ATTACHED PANEL OR KCH-19)

D
A [ ] (Power) switch
Press to switch the transceiver ON or OFF.
B [+] / [-] keys
Press to activate their programmable functions. The default key setting is
[Volume Up]/ [Volume Down].
C [J]/ [K] keys
Press to activate their programmable functions. The default key setting is
[Channel Up]/ [Channel Down].
D Illumination sensor
Sensor for Auto Dimmer function.
E Microphone jack
Insert the microphone plug into this jack.
F TX/RX indicator
The indicator lights in different colors to indicate the current status of the
transceiver.
Lights red while transmitting and green while receiving.
G [ ] / [ ] / [
Press to activate their programmable functions.
[ ] : The default key setting is [Clear].
[ ] : The default key setting is [Menu].
[ ] : The default key setting is [Squelch Off Momentary].
[H] : The default key setting is [Zone Down].
[I] : The default key setting is [Zone Up].
[ ] : The default key setting is [Function].
Auxiliary (orange) : The default key setting is [None].
H Speaker
Internal speaker.
For details on programming functions to the keys on your transceiver, please contact your dealer or refer
to the instruction manual available from the following URL.
http://manual2.jvckenwood.com/en_contents/search/

ORIENTATION

A B
E F
] / [H] / [I] / [ ] / Auxiliary (orange) keys
C
G H
9