Orientation - Kenwood NEXEDGE Série Mode D'emploi

Microphone
Antenna
① Channel selector
Rotate to change the operating channel.
② LED indicator
For the LED indicator status, refer to page 13.
③ Power switch/ Volume control
Turn clockwise to switch ON the transceiver. To switch OFF
the transceiver, turn counterclockwise until a click sounds.
Rotate to adjust the volume level.
④ PTT (Push to Talk) switch
Press and hold, then speak into the microphone to transmit.
⑤ Side 1 key
Press to activate its programmable function {page 8}.
⑥ Side 2 key
Press to activate its programmable function {page 8}.
⑦ Speaker/ microphone jacks
Insert the Speaker/ microphone or Headset plug into this jack
{page 6}.

ORIENTATION

Speaker
Battery pack
7