Programmable Auxiliary Functions - Kenwood NEXEDGE Série Mode D'emploi

PROGRAMMABLE AUXILIARY FUNCTIONS

Your dealer can program the Side 1 and Side 2 keys each with
one of the functions listed below.
Note: The duration of pressing a key to activate a function is
dependent on your dealer setting. Your dealer may have set
some keys to be held down for a short duration instead of being
momentarily pressed. Ask your dealer for details on which keys
need to be held down to activate their functions.
■ None
No function has been programmed.
■ Autodial
Autodial allows you to make a private DTMF call to another
party.
■ Call 1/ Call 2
Press to send a FleetSync status, NXDN status, or 2-tone
signaling call.
■ Calling Alert
A calling alert tone allows you to alert party members that
you are making a call. When making a call, first hold down
this key.
• While holding down the key, the calling alert tone will sound.
Release the key to end the tone, then hold down the PTT
switch and speak into the microphone to transmit.
■ CW Message
Press to transmit the preset Morse code message on your
current channel.
■ Emergency
Press and hold to enter (or exit) Emergency mode.
■ Key Lock
Press to lock/unlock the transceiver keys. Without Status
Memory, when the transceiver power is turned OFF and
then ON again, the Key Lock function will be cancelled.
8
1
1
2