Kenwood NEXEDGE Série Mode D'emploi page 4

THANK YOU
We are grateful you have chosen KENWOOD for your land
mobile radio applications.
NOTICES TO THE USER
◆ Government law prohibits the operation of unlicensed radio
transmitters within the territories under government control.
◆ Illegal operation is punishable by fine and/or imprisonment.
◆ Refer service to qualified technicians only.
Safety: It is important that the operator is aware of, and
understands, hazards common to the operation of any
transceiver.
Terminal Descriptions
Speaker/ Microphone Jacks
It is possible to use a resin-based cover for the Speaker/ Microphone jacks.
No. Name
1 PTT / RXD
2 MICIN
3 MICO
4 OPTDET
5 50V
6 AE
7 TXD
8 NC
9 NC
10 SPO
Antenna Terminal
50 Ω impedance
Battery Terminal
The battery terminal uses a spring plate.
The negative terminal connects to the chassis ground.
The battery is mounted on the rear side of the transceiver using a latch
mounting method.
Description
External PTT Input / Serial Data Input
External MIC Input
Internal MIC Output
External Option Detect
5V Output
GND
Serial Data Output
No Connection
No Connection
Received Audio Output
Impedance
47 kΩ
1.8 kΩ
1.8 kΩ
High Impedance
100 Ω
GND
6.9 kΩ
−
−
8 Ω
I/O
I
I
O
I
O
−
O
−
−
O