Talk Around - Kenwood NEXEDGE Série Mode D'emploi

■ Scan Temporary Delete
When scan pauses at an undesired channel, you can
remove that channel from the scanning sequence by
pressing or holding this key.
■ Scrambler/Encryption
The Scrambler (analog) and Encryption (NXDN) function
allows you to hold a conversation in complete privacy.
When activated, any other party listening in on your
channel will be unable to understand your conversation.
Press this key to toggle the Scrambler/Encryption function
ON or OFF.
■ Send the GPS data
With the KMC-48GPS unit is connected, you can press this
key to send your positioning data to the base station.
■ Squelch Off
Press to hear background noise. Press this key again to
return to normal operation.
■ Squelch Off Momentary
Continuously hold down this key to hear background noise.
Release this key to return to normal operation.

■ Talk Around

The Talk Around function allows you to communicate
directly with other transceivers, without the use of a
repeater. Press this key to toggle the Talk Around function
ON or OFF.
■ Zone Down
Press to select the next zone.
■ Zone Up
Press to select the previous zone.
Available only for Analog operation.
1
Available only for NXDN operation.
2
10
1
1