Orientation - Kenwood TK-2402 Mode D'emploi

Microphone
Antenna
Channel selector
Rotate to change the operating channel.
Channel Annunciation: When changing channels, the
•
transceiver will announce the newly selected channel number (if
enabled by your dealer).
LED indicator
For the LED indicator status, refer to page .
Power switch/ Volume control
Turn clockwise to switch ON the transceiver. To switch OFF
the transceiver, turn counterclockwise until a click sounds.
Rotate to adjust the volume level.
PTT (Push to Talk) switch
Press and hold, then speak around the microphone area to
transmit.
Side 1 key {refer to page 8}
Press to activate its programmable function.
Side 2 key {refer to page 8}
Press to activate its programmable function.
Speaker/ microphone jacks
Insert the Speaker/ microphone or Headset plug into this jack.

ORIENTATION

Speaker
Battery pack