Selecting An Operating Mode - Kenwood TH-D72A Mode D'emploi

Frequency ranges:
• 118 MHz: Band B 118 ~ 135.995 MHz
• 144 MHz: 136 ~ 173.995 MHz
• 300 MHz: Band B 320 ~ 399.995 MHz
• 430/440 MHz: Band A 410 ~ 470 MHz, Band B 400 ~ 523.995 MHz

SELECTING AN OPERATING MODE

There are 3 operating modes available to choose from: VFO mode, Memory
Channel mode, and Call Channel mode.
VFO Mode
VFO mode allows you to manually change the operating frequency.
1 Press [VFO] to enter VFO mode.
2 Rotate the Tuning control to select your desired operating frequency.
• You can also select a frequency by using the [
• The default step frequency for the Tuning control varies according to the model and
operating band:
Model
TH-D72A
TH-D72E
• To adjust the frequency by a larger amount, press [MHz] to enter MHz mode, then
rotate the Tuning control to adjust the frequency in steps of 1 MHz. Press [MHz]
again to exit MHz mode and adjust the frequency using the normal step frequency.
]/[ ] keys.
144 MHz
5 kHz
12.5 kHz
430/440 MHz
25 kHz
25 kHz
17