Kenwood TH-D72A Mode D'emploi page 20

12 Keypad
[MARK] (1)
Press [MARK] to display the Mark Way point list.
Press [MARK] (1s) to enter the Mark Way point registration mode.
Press [F], [MARK] to turn the internal GPS function ON or OFF.
[TNC] (2)
Press [TNC] to turn the built-in TNC ON and the APRS (or NAVITRA) mode
ON.
• Each time you press [TNC], the mode cycles through the following: APRS (or
NAVITRA) mode ON ➡ PACKET mode ON ➡ TNC OFF.
• When the built-in TNC turns on, "OPENING TNC" appears on the display.
• During "OPENING TNC" appears on the display, the mode cannot be changed.
Press [F], [TNC] to turn the Tracking Log function ON or OFF.
[POS] (3)
Press [POS] to display your "My position" (using the internal GPS) or to enter
the Position registration mode (not using the internal GPS) <APRS>.
Press [F], [POS] to enter the My Weather mode <APRS>.
[MSG] (4)
Press [MSG] to display the Message list.
Press [F], [MSG] to enter the New Message input mode <APRS>.
10