Kenwood TH-D72A Mode D'emploi page 42

APRS - Display
No. Display
Display Area
3U0
Interrupt Time
3U1
3U2 Cursor Control
APRS - Units 1
No. Display
Speed, Distance
3V0
Altitude, Rain
3V1
Temperature
3V2
APRS - Units 2
No. Display
Position
3W0
Grid format
3W1
APRS - NAVITRA GP
No. Display
Group Mode
3X0
Group Code
3X1
APRS - NAVITRA MS
No. Display
3Y0 message 1 ~ 5
SKY - SkyCommand
No. Display
CMD Callsign
500
501 TRP Callsign
Tone Freq.
502
Sky Command
503
1
Available only for the TH-D72A.
Note: Default settings are subject to change.
32
Description
Display Area
Interrupt Time
Cursor Control
Description
Speed/ Distance
Altitude/ Rain
Temperature
Description
Position format
Grid format
Description
Group mode
Group code
Description
Message text
Description
Commander callsign
Transporter callsign
Tone frequency
SKY command
Setting Values
Entire Disp/ Entire Always/
One Line
3/ 5/ 10 sec/ Infi nite
Followed/ Fixed
Setting Values
mi/h, mile/ km/h, km/ knots,
nm
feet, inch/ m, mm
°F/ °C
Setting Values
dd° mm. mm'/ dd° mm' ss. s"
Maidenhead Grid/ SAR Grid
(CONV)/ SAR Grid (CELL)
Setting Values
Off/ On
000/ 3 characters
Setting Values
Up to 20 characters
Setting Values
Up to 9 characters
Up to 9 characters
Frequency
Off/ Commander/ Transporter