Transferring Measurements To A Pc - Beurer BF 100 Body Complete Mode D'emploi

12 Transferring measurements to a PC

The control unit of the scales has a built-
in PC interface (USB) with which it is
possible to transfer the measurements
stored in the unit to a PC with a Windows
XP or Windows Vista operating system.
Microsoft Excel is required. The connec-
tion socket is on the right-hand side of the
control unit.
For more information, please refer to the
instructions included with the PC soft-
ware.
Notes:
• Effective evaluation of the measured
values is only possible if you have
set the date and time correctly.
• It is not possible to take any meas-
urements while the data is being
transferred.
• The measurement data remains on
the control unit even after being
transferred to the PC.
• If the 30 memory locations for a user
are full, "MEMORY_FULL" appears
on the display. The control unit re-
members the data that has just been
transferred. Therefore, if another 30
new memory locations for a user are
full, "MEMORY_FULL" appears on
the display again.
• You can, however, also transfer
individual measurement values at
any time.
38
Operation
• Install the analysis software on your PC
as described in the instructions for the
PC software.
• The control unit must be in standby
mode (date and time displayed). Insert
the flat USB connector of the connec-
tion cable into a USB port on your PC.
Plug the smaller mini USB plug into the
USB connection on the right-hand side
of the control unit.
• "CONNECTED VIA_USB" is shown on
the display and an audible signal
sounds from the PC. When first con-
nected, a "USB HID" is automatically
installed. The control unit is now ready
to transfer data for 30 seconds.
• Follow the information on data transfer
and analysis in the software and in the
operating instructions for the PC soft-
ware.
• After the data has been transferred, pull
the mini USB plug out of the USB port
on the control unit.
• Wait a few seconds until the control unit
automatically switches off.
www.TopSport.com.ua
Beurer BF 100