Gps Connector Parts; How To Attach The Belt Clip; Replacing The Antenna; Maximizing Range - Dogtra Pathfinder Guide D'utilisation

GPS CONNECTOR PARTS

How to Attach the Belt Clip

1) Align the belt clip to the grooves on the back of the GPS Connector.
2) With a firm grip, screw on the belt clip using the provided Philips head screws.
Caution! Tighten until firmly in place. Be careful not to over tighten.

Replacing the Antenna

Twist the antenna counter-clockwise to remove.
62

Maximizing Range

· The Pathfinder has a 15 km line-of-sight range.
· Holding the GPS Connector high with the antenna facing up will maximize
the range.
· Connector device must be near your phone for proper operation.
Preferably less than 10 m.
Maximum range Typical range

GPS COLLAR PARTS

Minimum range

Test Light

1) Turn on the GPS Collar and place
the test light over the contact points.
2) The test light will illuminate
momentarily when the Nick button
is pressed in the Pathfinder app.
The light will stay lit as long as the
Constant button is pressed in the
Pathfinder app, up to 12 seconds.
3) The test light will emit a brighter
light when the stimulation is increased.
Replacing the Antenna
Open the antenna enclosure by
removing the 4 screws and the
contact points. Remove the screw
holding the antenna in place to
replace the antenna.
63