Residual Risks; Security Instructions; Safety Instructions - ATIKA KGSZ 210 Instructions D'utilisation

The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by
the manufacturer and following the safety instructions in-
cluded in the instructions.
The relevant accident prevention regulations for the op-
eration as well as the other generally acknowledged occupa-
tional medicine and safety rules must be complied with.
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
Independently made alterations to the circular saw preclude
any liability of the manufacturer for resulting damages of any
kind.
The circular saw may only be equipped, used and serviced
by persons who are familiar with these and have been in-
structed in the hazards. Repair works may only be carried
out by us or by a customer service agent nominated by us.
The machine may not be used in a potentially explosive
environment or be exposed to the rain.
Metal parts (nails, etc.) must be removed from the timber to
be sawn.

Residual risks

Even if used properly, residual risks can exist even if the rele-
vant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety information" and
the "Intended usage" as well as the whole of the operating in-
structions are observed.
Observing these instructions, and taking proper care, will reduce
the risk of personal injury or damage to the equipment.
Danger of injury of fingers and hands by the tool (saw blade)
or work piece, e.g. when replacing the saw blade.
Injury from parts of the workpiece spinning off.
Throwback of the workpiece or workpiece parts.
Breakage and expulsion of saw blade.
Risk from electricity, by using non-standard electrical con-
nections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Emission of harmful timber dust when operating without
exhaust suction.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.

Safety instructions

Wood processing machines can be dangerous when
used improperly. The use of electrical tools requires the
observation of basic safety precautions to eliminate risk of
fire, electrical shock and personal injuries.
Before commissioning this product, read and keep to the
following advice. Also observe the preventive regulations of
your professional association and the safety provisions
applicable in the respective country, in order to protect
yourself and others from possible injury.
Pass the safety instructions on to all persons who work
with the machine.
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using
it, by reading and understanding the operating instruc-
tions.
Be observant. Attend to what you do. Start working with
rationality. Do not use the device when you are tired or
under the influence of drugs, alcohol or medicaments.
One moment of carelessness when using the device can
result in serious injuries.
Avoid unusual posture. Ensure that you have stand in a
secure standing position and maintain your balance at all
times. Do not lean forward.
Wear suitable work clothes:
− do not wear loose-fitting clothes or jewellery; they can
catch in moving parts.
− slip-proof shoes
− wear a hair-net if your hair is long
Wear protective clothing:
− ear protection (sound pressure levels at the workplace
usually exceed 85 dB(A)
− safety goggles
− Dust mask with work activities generating dust
− Gloves when replacing the saw blade
Operate the saw only on
− firm
− level
− slip-free
− vibration free surface
Keep your workplace in an orderly condition! Untidiness
can result in accidents.
Take into consideration environmental influences:
− Do not expose the machine to rain.
− Do not use the machine in humid or wet environment.
− Ensure that the workplace is well lit.
−
Do not use the machine near inflammable liquids or
gases.
− Connect the mitre crosscut saw to a dust collection de-
vice when cutting wood.
Never leave the machine unattended.
Persons under 18 may not operate the machine.
Keep other persons away.
Do not allow other persons, especially children, to touch
the tool or cable.
Keep them away from your working area.
Assume the correct work posture. Stand to the front at the
operator side facing the saw and to the right of the saw blade
alignment.
Only begin cutting after the saw blade has reached its re-
quired rotational speed.
Do not overload the machine! You work better and safer in
the given performance range.
20