Technical Specifications - Tractel Davitrac+ Manuel D'installation, D'emploi Et D'entretien

Davitrac™+ jib crane:
Position
27.5" (700 mm)
21.65" (550 mm)
15.75" (400 mm)
Self-stabilising base
Position
A1
A2
Davitrac™+
Self-stabilising base
Mounted floor base
Wall mounted base
Clearance mural base
Flush floor base
IMPORTANT:
The Davitrac™+ jib crane may be used as a fall protection anchor device (ANSI Z359.18-2017 and CSA Z259.15-17)
and may be fitted with
• fall arrest systems in accordance with OSHA 1926.502,
• rescue lifting devices in accordance with ANSI Z359.18-2017 and CSA Z259.15-17,
• rope-suspended working devices.
In such a configuration, it may not be used simultaneously as an anchor point for lifting equipment.
OR
The Davitrac™+ jib crane may be used as a lifting anchor point; in such a configuration, only one operator can
connect to one of the anchor points on the articulation plate (ref. I2, fig 2)

Technical specifications

Table 1 - Dimensions (fig. 1)
Table 2 - Davitrac™+ compositions with bases
Headroom H
64.5" (1640 mm)
59.8" (1520 mm)
55" (1400 mm)
Width
1680 mm
1404 mm
DTP2000
210098
T90DAVI-MFA
T90DAVI-WMA
T90DAVI-CMA
T90DAVI-FFA
EN
15